5.7 liters (40 cubic feet) tank made of aluminum alloy 6061-T6. CE approval. Flat bottom. Dimensions: Diameter – 133.4 mm; Height – 645 mm. Weight: 7.3 kg

11.1 liters (80 cubic feet) tank made of aluminum alloy 6061-T6. CE approval. Flat bottom. Dimensions: Diameter – 184.2 mm; Height – 658 mm. Weight: 14.2 kg

Faber 12 liters container in long format and white color. CE approved and compliance with EN250 standard. The thread is M25x2 with standard EN144 rule. Work pressure of 232 bar. Not include valve.

Full set of twin cylinders, DIR configured according to standards and includes the following items:12 liters tanks in long format, working pressure 232 bar, thread M 25×2 tap EN144 and concave bottom, Twin cylinders valve with manilfold and isolation valve, Stainless steel rings 171 mm in diameter

Full set of twin cylinders, DIR configured according to standards and includes the following items: 10 liters tanks in long format, working pressure 200 bar, thread M 25×2 tap EN144 and concave bottom, Twin cylinders valve with manilfold and isolation valve, Stainless steel rings 171 mm in diameter

Surface gauge for checking pressure out of the water bottles. DIN system. Purge by knob. Dial easy to read. Scale up to 400 bar. Is clean for use with oxygen, but if used with air the O2 service is lost.

TDS diving pressure gauge pony type, reduced size, which is placed directly on an HP output of the first stage without hose. Widely used in the stage tanks regulators to control gas in them, reducing the size of the installation and minimizing potential failure points, such as HP hoses.

TDS Mini 3 Scuba Diving Control Gauges Console Depth Pressure Compass: Control console compact and lightweight that contains the following elements: Depth and pressure gauge, and compass

TDS Mini Scuba Diving Pressure Gauge 400 Bar: TDS pressure gauge from the TDS Control Gauges Mini series with small size and easy readability.

TDS Strong Black Scuba Diving Control Console: Diving control console with analog instruments, pressure gauge with scale up to 400 bar and analog depth gauge with range up to 70 m.

TDS Strong Black Scuba Diving Pressure Gauge: Pressure Gauge for scuba diving up to 400 bar, with steel housing and protective rubber boot. Very resistant socket with rubber rings on either side.

Pressure gauge up to 400 bar, with steel case and rubber sheath in green for nitrox-oxygen.